Museum logo
Museum logo

Person Record

Name Tasaki, Ichiji
No Archives 1
No Objects 201
No Photos 0

Associated Records

Image of 10.0009.194 - Chamber, Specimen

10.0009.194 - Chamber, Specimen

Plexiglas rack with three holes drilled in and black residue.

Image of 10.0009.191 - Chamber, Specimen

10.0009.191 - Chamber, Specimen

Thick plexiglas box with no top and missing one side. Blue marker line. One short end has a hole drilled in it.

Image of 10.0009.192 - Chamber, Specimen

10.0009.192 - Chamber, Specimen

Thick plexiglas box with no lid and missing one side.

Image of 10.0009.096 - Box, Letter

10.0009.096 - Box, Letter

Stained and finished wood tray.

Image of 10.0009.020 - Case

10.0009.020 - Case

Hinged, clear plastic case. Contains 10.0009.013-020.

Image of 10.0009.001 - Guillotine

10.0009.001 - Guillotine

Light metal (aluminum?) base with holes for four screws. The rack holds a stainless steel cutting blade, controlled by a handle. Cat. no. 51330.

Image of 10.0009.002 - Set, Dissecting

10.0009.002 - Set, Dissecting

Cork board, slightly warped. Inserted into it are fifteen pushpins; six teasing needles of varying height with wood handles, and two black binder clips.

Image of 10.0009.003 - Postcard

10.0009.003 - Postcard

.01 1992 Bufo marinus notice .02 1993 Bullfrog season open .03 1993 Bullfrog season closed .01 Postcard on white cardstock. Sent to Dr. Ichiji Tasaki in Bldg. 36, regarding the availability of Bufo marinus and Ranapipiens toads. Taped to .02 .02 Manila cardstock. Sent to Tasaki in Bldg. 36 regarding bullfrog and leopard frog season. .03 White cardstock, etc., regarding closing of the season for bullfrogs and substitutions of Ranatemporaria.

Image of 10.0009.004 - Guillotine

10.0009.004 - Guillotine

Light metal base with holes for four screws. Rack to hold stainless steel cutting blade with handle. Larger than 10.0009.001.

Image of 10.0009.005 - Micromanipulator

10.0009.005 - Micromanipulator

Metal base. Mounted on the base is a semi-circular wrist rest. Mechanism has a red-capped joystick that moves assembly.

Image of 10.0009.006 - Micromanipulator

10.0009.006 - Micromanipulator

.01 Micromanipulator .02 Acrylic rod .01 Double-tiered heavy metal base with black enamel. On either side of the stand is a metal rail with a screw to raise the manipulator on a hinge to a tilt. The assembly has several adjusting knobs. The top has a groove to hold pipettes or instruments with a curved bracket. "Narishige, Japan" logo in white. The assembly can raise up or down. .02 Made by Tasaki, an acrylic (?) rod with microwire attached.

Image of 10.0009.007 - Micromanipulator

10.0009.007 - Micromanipulator

.01 Micromanipulator .02 Acrylic rod .01 Double-tiered heavy metal base with black enamel. On either side of the stand is a metal rail with a screw to raise the manipulator on a hinge to a tilt. The assembly has several adjusting knobs. The top has a groove to hold pipettes or instruments with a curved bracket. "Narishige, Japan" logo in white. The assembly can raise up or down. .02 Made by Tasaki, an acrylic (?) rod with microwire attached.

Image of 10.0009.008 - Interferometer

10.0009.008 - Interferometer

.01 Interferometer .02 Magnifier .03 Case .01 Objective-mounted interferometer. Metal with tan enamel, stainless steel knobs for adjusting, microscope thread on top, filter on the end. .02 Black enameled metal. One end is a bracket with a set screw, the other holds a magnifier (prism?). .03 Hinged case with single clasp, covered with red leatherette. The inside is lined with blue velveteen. "Watson Barnet" in gold.

Image of 10.0009.009 - Weight, Balance

10.0009.009 - Weight, Balance

.01 100 g weight .02 50 g weight .03 30 g weight .04 20 g weight .05 10 g weight .06 5 g weight .07 3 g weight .08 2 g weight .09 1 g weight .10 removable holder for weights .11 500 mg weight .12 300 mg weight .13 200 mg weight .14 100 mg weight .15 30 mg weight .16 20 mg weight .17 20 mg weight .18 10 mg weight .19 5 mg weight .20 holder for mg weights .21 cover for mg weight holder .22 block to hod up mg weights .23 tweezer holder .24 wood case .01-09 Metal cylinders with knob handles and stamped weights on the tops. .10 Wood holder with fitted inserts lines with red fabric. .11-19 Sheets of metal with weight stamped on it. The l

Image of 10.0009.010 - Objective, Microscope

10.0009.010 - Objective, Microscope

Metal with gray enamel. Bausch & Lomb logo on one side, "4" on the other side. Screw in the side near lens. Plate on the bottom screws off.

Image of 10.0009.011 - Objective, Microscope

10.0009.011 - Objective, Microscope

Metal with gray enamel. Bausch & Lomb logo on one side, "3" on the other side. Screw in the side near lens. Plate on the bottom screws off.

Image of 10.0009.012 - Objective, Microscope

10.0009.012 - Objective, Microscope

Metal with gray enamel. Bausch & Lomb logo on one side, ".66" on the other side. Screw in the side near lens. Plate on the bottom screws off.

Image of 10.0009.013 - Objective, Microscope

10.0009.013 - Objective, Microscope

Metal with gray enamel. Bausch & Lomb logo on one side, "1.3" on the other side. Screw in the side near lens. Plate on the bottom screws off.

Image of 10.0009.014 - Micrometer

10.0009.014 - Micrometer

.01 Micrometer slide .02 Case .01 Glass microscope slide with a scale ruled directly on it. Bausch & Lomb logo on one side; "0.1 mm 0.01 mm" onthe other. The scale is ruled to 0.01 mm. The center of the slide has a dark circle with a mirror-like cover over the center. .02 Black leatherette case with a slide holder lined in blue fabric. The sides fold over the top and close with a snap.

Image of 10.0009.015 - Slide

10.0009.015 - Slide

Red paper-covered box witha separate lid. Sticker is gold with black "Gold Seal, Standard of Quality, Microscope Cover Glasses....Oz. size 35x60, Thinness 1." Handwritten on the box is "0.113" and something in marker. Inside are very thin glass sheets with mirror sheets and paper between them.